Condition: Used-Very Good

Detailed Description:
Cycles are 5.5mm on each machine one new 1996 the other 1997

Position

1 - CUTOFF
2 - VE-36-100 QC
3 - 26/80 RECESSING
4 - VE36/100 QC
5 - VE20/80 Q C
6 - VE20/80 QC
7 - VE20/80 QC
8 - VE36/100 QC
9 - VE36/100 QC
10 - VE20/80 QC
11 - VE20/80 QC
12 - VE30/60 QC

Both Machines Were Tool Identically, But Three Of The 36-100
Units Were Removed From The 1997 Machine.


(1) Unload unit

(5) Tool spindle units VE 20/80 ( two preloaded thrust bearing design with 20MM spindle, 80MM stroke) hydraulically actuated tool spindle quill with AC motor drive and modular plug in.

(2) Drill detectors, BK4 for station 7.

(3) Unipower HPL tool monitoring system to monitor tool wear, breakage, and missing tool
(not including VGA monitor). For stations 4, 5, and 6.

(3) Durant pre-settable tool protection counters model 4561

(1) Set of spare parts.

(1) Installation at Buyer''''''''s facility (5 days).

(1) Set of cutting tools.

(1) Packing and shipping preparation

(1) Engineering.

(1) Machine prepared for production using standard cutting oil.

(1) Additional Oil Pump.

(1) Steel operator''''''''s platform deluxe around machine elevated for easy access to tooling area.

(12) Sets of chuck jaws (1 pair).

(12) Top jaws, 2nd part.

(1) 12'''''''' automatic bar feeder magazine with bar separator and electronic bar change maintains separation
between bars on feed tray to ensure smooth bar feeding action when using large diameter stock. 8 bar
capacity tray based on 1 3/4'''''''' diameter stock.

(1) Cut off unit AE 250 QC. AE 250 with Valenite Quick-Change.

(1) Rear slide assembly-

(1) Guide bushing round

(1) Guide tube (3 pcs.)